Reducing Dirty Oil Waste in Biscuit Moulding through 5S, GMP, and Quality Control Circle Implementation

Authors

  • Allysha Diva Canceria Politeknik ATI Padang, Indonesia
  • Mitha Fitriani Caniago Universitas Bina Nusantara, Indonesia
  • Fathir Muhammad Frihas Universitas Bina Bangsa, Indonesia

Keywords:

5R, GMP, Quality Control Circle, Dirty Oil Waste, Moulding Process

Abstract

The food manufacturing industry faces challenges in managing production waste, including dirty oil waste generated during the moulding stage of biscuit production. This study evaluates the implementation of 5R principles (Sort, Set in Order, Shine, Standardize, and Sustain) and Good Manufacturing Practices (GMP) through a Quality Control Circle (QCC), locally known as Gugus Kendali Mutu (GKM), approach to reduce dirty oil waste. The study was conducted on a biscuit crackers production line at PT X, a national-scale biscuit manufacturer in Indonesia, during March–August 2026 using a case-study and action-research design based on the eight-step GKM cycle within the Plan-Do-Check-Action framework. Data were collected through field observations, direct weighing, stratification, Pareto analysis, and fishbone diagrams. Initial identification showed that dirty oil waste from the gauge roll unit reached 594 kg over four weeks (0.12% of production output), while total dirty waste generated during January–April 2026 amounted to 20,610 kg. Root-cause analysis identified four dominant factors: Man, Method, Machine, and Environment. Four improvement measures were implemented: a residual-oil processing unit, two-stage mesh filtration, a centrifugal separator, and a valve-equipped tray-mount modification, with a total investment of IDR 15,215,250. Post-implementation evaluation indicated that dirty oil waste decreased from 0.12% to nearly 0%, meeting the established SMART improvement target. These findings indicate that integrating 5R, GMP, and GKM can contribute to reducing production waste and improving process control in food manufacturing. However, the economic benefits, including cost savings and investment payback, as well as the environmental impact of the improvements, require further evaluation.

References

Afriani, D. L., & Suparno, S. (2025). Integration of Six Sigma and Fuzzy FMEA to reduce oil losses in the crude palm oil (CPO) processing industry in Central Kalimantan. International Journal of Social Service and Research, 5(6), 638–649. https://doi.org/10.46799/ijssr.v5i6.1269

Aziz, K., Pranata, J., Alam, I. C., Ramadhani, F., Burhanudin, A. Z., & Prastyo, Y. (2025). Quality control in plastic injection manufacturing at PT. Minebea Accesssolution Indonesia: The number of NG scratch. Review: Journal of Multidisciplinary in Social Sciences, 2(1), 1–7. https://doi.org/10.59422/rjmss.v2i01.705

Budiansyah, M. R., Suwarno, A., & Syahliantina, A. (2026). Analisis Pengendalian Kualitas Produk Seat Frame Front Cushion Menggunakan Metode Quality Control Circle (QCC) pada PT TBA. INSOLOGI: Jurnal Sains dan Teknologi. https://doi.org/10.55123/insologi.v5i1.7635

Buwono, E. W. S., Yusup, M., & Atmaja, D. A. S. P. (2025). Analisis Faktor – Faktor Berpengaruh Pada Proses Treatment Pengolahan Limbah Minyak Mentah Pada PT. Wastec Internasional. Venus: Jurnal Publikasi Rumpun Ilmu Teknik. https://doi.org/10.61132/venus.v3i3.961

Chan, Y., Leonardo, Y., Supriatna, A., & Faturachman, D. (2024). The effect of quality control standard implementation for quality improvement of the casting process on the jewellery manufacturing industry. Journal of Research and Technology. https://doi.org/10.55732/jrt.v10i1.1206

Costa, A., Ferreira, L., Silva, F., Sa, J. C., Pereira, M., & Avila, P. (2021). Analysis and improvement in the Electrical Discharge Machining process used on the manufacturing of moulds for plastics injection moulding. IOP Conference Series: Materials Science and Engineering. https://doi.org/10.1088/1757-899x/1193/1/012021

Donomai, N. K. A., & Pinto, F. R. (2023). Application of methodology 5s in an industrial assembly company in the City of Manaus, AM. International Journal for Innovation Education and Research. https://doi.org/10.31686/ijier.vol11.iss2.4090

Duc, M. L., & Thu, M. (2022). Application of Lean Six Sigma for Improve Productivity at The Mechanical Plant. A Case Study. Manufacturing Technology. https://doi.org/10.21062/mft.2022.028

Haberchad, O., & Salih-Alj, Y. (2025). Quality Control and Process Optimization of Injection Molding using a Data-Oriented Approach in an Industrial Setting. Journal of Data Science and Intelligent Systems. https://doi.org/10.47852/bonviewjdsis52024730

Hafiz, M., & Ernawati, A. D. (2025). Analysis Of Plastic Pellets Production Process To Reduce Waste Using Lean Six Sigma Method And FMEA. Jurnal Sistem Cerdas. https://doi.org/10.37396/jsc.v8i1.499

Imtinan, I., & Cahyaputri, B. (2024). Waste Identification Using the Value Stream Mapping (VSM) Method on the PT XYZ Transparent Bar Soap Production Line. Jurnal Teknologi dan Manajemen. https://doi.org/10.52330/jtm.v22i1.194

Indrawan, M., Efendi, Y., Maharani, D. K. S., & Raya, C. (2026). Implementasi QCC pada Penerapan Budaya 5R dan Safety di PT Rapu. Bhakti Karya dan Inovatif. https://doi.org/10.37278/bhaktikaryadaninovatif.v6i1.1486

Jou, Y., Silitonga, R., Lin, M., Sukwadi, R., & Rivaldo, J. (2022). Application of Six Sigma Methodology in an Automotive Manufacturing Company: A Case Study. Sustainability. https://doi.org/10.3390/su142114497

Kudo, S. Y., Isa, D. R., & Payu, M. R. F. (2025). Application of Statistical Quality Control and Failure Mode and Effect Analysis to Improve Panada Tore Quality at PT. Cita Rasa Pagimana. Journal of Mathematics, Computations and Statistics. https://doi.org/10.35580/jmathcos.v8i1.6708

Larisang, Sanusi, Hamid, A., Hasibuan, R. P., & Sugito, E. (2025). Performance Enhancement in Injection Moulding Manufacturing: A Case Study Utilizing the DMAIC Methodology. Mathematical Modelling of Engineering Problems. https://doi.org/10.18280/mmep.120415

Ledezma, J. M., & Posada-Correa, J. C. (2023). Definition and evaluation of good manufacturing practices for plastic injection molding. Energy Efficiency. https://doi.org/10.1007/s12053-023-10103-x

Ly, M., & Viet, Q. N. K. (2022). Improvement Productivity and Quality by Using Lean Six Sigma: A Case Study in Mechanical Manufacturing. International Research Journal on Advanced Science Hub. https://doi.org/10.47392/irjash.2022.066

Maulana, M. T., Ayu, D., Sari, P., Kindangen, L. A., Setiawan, Y., & Prastyo, Y. (2025). Pengaplikasian 5S dan Kaizen Sebagai Upaya Peningkatan Kualitas Produksi Area Spot Welding di Perusahaan Manufaktur Otomotif. Journal of Science, Technology, and Innovation. https://doi.org/10.65310/09hxkp86

Meirizha, S., & Kristina, D. (2021). Analisis kecacatan produk crude palm oil (CPO) menggunakan metode quality control circle (QCC) pada PT. Ramajaya Pramukti. Jurnal Surya Teknika. https://doi.org/10.37859/jst.v8i1.2616

Muttaqin, N. U. A., & Aryanny, E. (2024). Defect Analysis of Packaging Bottle Products Using Six Sigma and Kaizen Methods at PT. XYZ. IJIEM - Indonesian Journal of Industrial Engineering and Management. https://doi.org/10.22441/ijiem.v5i1.22420

Nurhadi, D. A., & Arista, A. (2025). Perbaikan kualitas mold proses injection molding pada PT Giken Precision Indonesia. Computer and Science Industrial Engineering (COMASIE). https://doi.org/10.33884/comasiejournal.v12i3.9790

Oktafiani, I. S., & Subiyantoro, S. (2022). Application of 5S Management in Improving the Quality of Furniture Production in Meubel Karya Agung of Ponorogo Regency. PALAPA. https://doi.org/10.36088/palapa.v10i1.1658

Patel, M., & Kiran, M. B. (2022). Implementation of Kaizen principles in an injection molding machine manufacturing company. Proceedings of the 7th North American International Conference on Industrial Engineering and Operations Management. IEOM Society International. https://doi.org/10.46254/na07.20220390

Ponda, H., & Suyanto, S. (2026). Enhancing Insert Lifetime in Side Cutting of Special Nut Products Using The QCC Method to Reduce Cost Per Piece. Heuristic. https://doi.org/10.30996/heuristic.v22i2.132876

Rizkika, A. D., Salomon, L., & Kosasih, W. (2025). Pendekatan Green Lean Six Sigma untuk minimisasi limbah dalam produksi produk gelas di industri peralatan plastik rumah tangga. Jurnal Mitra Teknik Industri. https://doi.org/10.24912/jmti.v4i1.34601

Saha, R. K., & Mahmud, F. (2022). Lean Tools and Techniques for Improving Production Performance and Waste Reduction in A Plastic Company: A Case Study. Proceedings of the International Conference in Industrial & Mechanical Engineering and Operations Management (IMEOM). https://doi.org/10.46254/bd05.20220091

Shahriar, M. M., Parvez, M., Islam, M., & Talapatra, S. (2022). Implementation of 5S in a plastic bag manufacturing industry: A case study. Cleaner Engineering and Technology. https://doi.org/10.1016/j.clet.2022.100488

Sulaeman, S., Misaran, M. S., Farm, Y. Y., & Chua, B. (2024). Quality Control Circles Technique for Reducing Fine Bored Parts Rejects After Tool Change. Proceeding of the International Conference on Multidisciplinary Research for Sustainable Innovation. https://doi.org/10.31098/icmrsi.v1i.804

Tsarouhas, P., & Sidiropoulou, N. (2023). Application of Six Sigma methodology using DMAIC approach for a packaging olives production system: a case study. International Journal of Lean Six Sigma. https://doi.org/10.1108/ijlss-06-2022-0140

Vongpeang, S., Sonsanam, A., Sripanom, T., & Angboonta, P. (2024). Reducing Black Spot Waste from Motor Housing Parts- Model EM-14 with Qc7 Quality Tools. Nanotechnology Perceptions. https://doi.org/10.62441/nano-ntp.v20i3.17

Yodpijit, S. N., Wangrakdiskul, S., Charoensuk, N., Phromphat, K., & Boonmee, C. (2025). Sustainable Quality Transformation In Agro-Industrial Manufacturing: A Six Sigma–Kaizen Model For Thailand’s Crude Palm Oil Sector. Jurnal Riset Ilmu Teknik. https://doi.org/10.59976/jurit.v3i2.195

Zaid, S., & Nasrul, N. (2025). Application of the Six Sigma Method to Improve the Quality of Cocoa Oil Industry Products in Southeast Sulawesi Province, Indonesia. Journal of Global Innovations in Agricultural Sciences. https://doi.org/10.22194/jgias/25.1464

Zhafira, A., Fitriana, R., & Mayusda, I. (2022). Quality improvement and waste minimization in the production process of 450 mm jacking pipe using the Lean Six Sigma method. Proceedings of the 3rd Asia Pacific International Conference on Industrial Engineering and Operations Management. IEOM Society International. https://doi.org/10.46254/ap03.20220211

Downloads

Published

2026-10-22

How to Cite

Allysha Diva Canceria, Mitha Fitriani Caniago, & Fathir Muhammad Frihas. (2026). Reducing Dirty Oil Waste in Biscuit Moulding through 5S, GMP, and Quality Control Circle Implementation. Unified Systems Approach for Human Centered Operations (USAHO), 1(1), 51–68. Retrieved from https://gpijournal.com/index.php/usaho/article/view/791

Issue

Section

Articles