Characterization of Optical and Electronic Properties of Biocomposites Based on 2D Crystals (Reduced Graphene Oxide, MoS₂) and Biomacromolecules for Flexible Electronic Devices

Authors

  • Yuli Hardina Nasution Universitas Negeri Padang, Indonesia
  • Chantika Aditya Prameswari Poltekkes Kemenkes Padang, Indonesia

Keywords:

Biocomposite, Reduced Graphene Oxide, MoS₂, Silk Fibroin, Flexible Electronics, Optical Band Gap

Abstract

Flexible electronic devices require materials with mechanical compliance and tunable optoelectronic properties. This study developed reduced graphene oxide (rGO)-MoS₂/silk fibroin (SF) biocomposite films containing 0–2.0 wt% hybrid filler via solution casting. Structural, optical, and electrical properties were investigated using FTIR, XRD, UV-Vis spectroscopy with Tauc analysis, Raman spectroscopy, four-point-probe measurements, and repeated bending tests. FTIR revealed an increased β-sheet contribution, indicated by the amide I band shift from 1652 to 1622 cm⁻¹. XRD confirmed the formation of β-sheet (silk-II) structures and the presence of rGO and MoS₂ reflections. The optical band gap decreased from 4.42 to 2.35 eV, while the Raman D/G intensity ratio increased from 0.55 to 1.00, indicating increased defect density. The MoS₂ E¹₂ᵍ–A₁ᵍ separation decreased from 26 to 21 cm⁻¹, suggesting thinner MoS₂ domains. Sheet resistance decreased by over four orders of magnitude, from 3.2 × 10⁷ to 1.2 × 10³ Ω/sq, with a percolation threshold near 1.0 wt%. Films containing 1.5–2.0 wt% filler maintained electromechanical stability after 1000 bending cycles, with resistance changes below 7.4%. These findings demonstrate the potential of rGO-MoS₂/SF biocomposites as tunable, bio-based materials for flexible electronics.

References

Azizi-Lalabadi, M., & Jafari, S. M. (2021). Bio-nanocomposites of graphene with biopolymers: Fabrication, properties, and applications. Advances in Colloid and Interface Science, 292, 102416.

Azka, M. A., Muhammad, F. A. H., Habib, A., Akmal, Railis, R. M., Sapuan, S. M., Abral, H., & AL-Oqla, F. M. (2025). A review of graphene, nanocellulose, and graphene/nanocellulose hybrid reinforced biopolymer composites in electronic applications. Physical Sciences Reviews. https://doi.org/10.1515/psr-2024-0078

Bhattacharya, T., & Kaplan, D. L. (2022). Silk-elastin-like-protein/graphene-oxide composites for dynamic electronic biomaterials. Macromolecular Bioscience, 22(8), e2200122. https://doi.org/10.1002/mabi.202200122

Brazil, T. R., et al. (2023). Renewable PLA/PHBV blend-based graphene nanoplatelets and carbon nanotube hybrid nanocomposites for electromagnetic and electric-related applications. ACS Applied Electronic Materials, 5(11), 6165. https://doi.org/10.1021/acsaelm.3c01099

Cataldi, P., et al. (2020). Multifunctional biocomposites based on polyhydroxyalkanoate and graphene/carbon nanofiber hybrids for electrical and thermal applications. ACS Applied Polymer Materials, 2(8), 3525. https://doi.org/10.1021/acsapm.0c00539

Danial, W. H., Bahri, N. F. M., & Majid, Z. A. (2021). Preparation, marriage chemistry and applications of graphene quantum dots–nanocellulose composite: A brief review. Nanomaterials, 11(10), 2615.

Deng, Q., Wang, F., Gough, C. R., & Hu, X. (2022). Tunable microphase-regulated silk fibroin/poly(lactic acid) biocomposite materials generated from ionic liquids. International Journal of Biological Macromolecules, 197, 55–67. https://doi.org/10.1016/j.ijbiomac.2021.12.060

Díez-Pascual, A. M., & Rahdar, A. (2022). Graphene-based polymer composites for flexible electronic applications. Micromachines, 13(7), 1123. https://doi.org/10.3390/mi13071123

Habib, A., Sapuan, S. M., Zainudin, E. S., & Atiqah, A. (2024). A review of electrical and piezoelectric properties of nanocellulose biocomposites. Physical Sciences Reviews, 9(8), 2689–2713. https://doi.org/10.1515/psr-2022-0195

Hu, X., Kaplan, D., & Cebe, P. (2006). Determining beta-sheet crystallinity in fibrous proteins by thermal analysis and infrared spectroscopy. Macromolecules, 39(18), 6161–6170. https://doi.org/10.1021/ma0610109

Hummers, W. S., & Offeman, R. E. (1958). Preparation of graphitic oxide. Journal of the American Chemical Society, 80(6), 1339. https://doi.org/10.1021/ja01539a017

Jain, S., Vedavyas, V., Prajwal, R. V., Shaji, M., Nath, V. G., Angappane, S., & Achutharao, G. (2023). Silk and its composites for humidity and gas sensing applications. Frontiers in Chemistry, 11, 1141259. https://doi.org/10.3389/fchem.2023.1141259

Lee, C., Yan, H., Brus, L. E., Heinz, T. F., Hone, J., & Ryu, S. (2010). Anomalous lattice vibrations of single- and few-layer MoS₂. ACS Nano, 4(5), 2695–2700. https://doi.org/10.1021/nn1003937

Li, C., Wu, J., Shi, H., Xia, Z., Sahoo, J. K., Yeo, J., & Kaplan, D. L. (2022). Fiber-based biopolymer processing as a route toward sustainability. Advanced Materials, 34(1), 2105196. https://doi.org/10.1002/adma.202105196

Li, K., Li, P., & Fan, Y. (2019). The assembly of silk fibroin and graphene-based nanomaterials with enhanced mechanical/conductive properties and their biomedical applications. Journal of Materials Chemistry B, 7, 6890–6913. https://doi.org/10.1039/C9TB01733J

Li, M., Xiao, M., Wang, Q., Zhang, J., Xue, X., Zhao, J., Zhang, W., & Lu, C. (2022). Mechanically strong and electrically conductive polyethylene oxide/few-layer graphene/cellulose nanofibrils nanocomposite films. Nanomaterials, 12(23), 4152. https://doi.org/10.3390/nano12234152

Liu, X., Xia, Q., Zhou, J., Zhang, Y., Ju, H., & Deng, Z. (2022). Chemical modification of silk fibroin through serine amino acid residues. Materials, 15(13), 4399. https://doi.org/10.3390/ma15134399

Lu, A.-Y., Martins, L. G. P., Shen, P.-C., Chen, Z., Park, J.-H., Xue, M., Han, J., Mao, N., Chiu, M.-H., Palacios, T., Tung, V., & Kong, J. (2022). Unraveling the correlation between Raman and photoluminescence in monolayer MoS₂ through machine-learning models. Advanced Materials, 34(34), e2202911. https://doi.org/10.1002/adma.202202911

Mahamud, S., et al. (2021). Effect of graphene nanoplatelet addition on the electrical conductivity of poly(hydroxybutyrate-co-hydroxyvalerate) biocomposites. Journal of Physics: Conference Series, 2080, 012010. https://doi.org/10.1088/1742-6596/2080/1/012010

Mahmud, E., & Islam, M. R. (2023). Improved electrochemical performance of bio-derived plasticized starch/reduced graphene oxide/molybdenum disulfide ternary nanocomposite for flexible energy storage applications. Scientific Reports, 13, 20967. https://doi.org/10.1038/s41598-023-48326-8

Murphy, A. R., & Kaplan, D. L. (2009). Biomedical applications of chemically-modified silk fibroin. Journal of Materials Chemistry, 19, 6443–6450. https://doi.org/10.1039/B905802H

Nilogal, P., Uppine, G. B., Rayaraddi, R., Sanjeevappa, H. K., Martis, L. J., Narayana, B., & Yallappa, S. (2021). Conductive in situ reduced graphene oxide–silk fibroin bionanocomposites. ACS Omega, 6(20), 12995–13007. https://doi.org/10.1021/acsomega.1c00013

Nowak, A. P., et al. (2022). Poly(hydroxybutyrate-co-hydroxyvalerate) as a biodegradable binder in a negative electrode material for lithium-ion batteries. Applied Surface Science, 606, 154933.

Papadopoulou, E. L., et al. (2019). Green composites of poly(3-hydroxybutyrate) containing graphene nanoplatelets with desirable electrical conductivity and oxygen barrier properties. ACS Omega, 4(12), 19746. https://doi.org/10.1021/acsomega.9b02528

Purohit, S. D., et al. (2019). Development of a nanocomposite scaffold of gelatin–alginate–graphene oxide for bone tissue engineering. International Journal of Biological Macromolecules, 133, 592–602. https://doi.org/10.1016/j.ijbiomac.2019.04.113

Rouf, T. B., & Kokini, J. L. (2016). Biodegradable biopolymer–graphene nanocomposites. Journal of Materials Science, 51, 9915–9945.

Seydibeyoğlu, M. Ö., Dogru, A., Wang, J., Rencheck, M., Han, Y., Wang, L., Seydibeyoğlu, E. A., Zhao, X., Ong, K., Shatkin, J. A., Shams Es-haghi, S., Bhandari, S., Ozcan, S., & Gardner, D. J. (2023). Review on hybrid reinforced polymer matrix composites with nanocellulose, nanomaterials, and other fibers. Polymers, 15(4), 984. https://doi.org/10.3390/polym15040984

Shao, W., et al. (2017). Biomineralized poly(L-lactic-co-glycolic acid)/graphene oxide/tussah silk fibroin nanofiber scaffolds with multiple orthogonal layers enhance osteoblastic differentiation of mesenchymal stem cells. ACS Biomaterials Science & Engineering, 3(7), 1370–1381. https://doi.org/10.1021/acsbiomaterials.6b00533

Tayeb, P., & Tayeb, A. H. (2019). Nanocellulose applications in sustainable electrochemical and piezoelectric systems: A review. Carbohydrate Polymers, 224, 115190.

Wen, D.-L., Sun, D.-H., Huang, P., Huang, W., Su, M., Wang, Y., Han, M.-D., Kim, B., Brugger, J., Zhang, H.-X., & Zhang, X.-S. (2021). Recent progress in silk fibroin-based flexible electronics. Microsystems & Nanoengineering, 7, 35. https://doi.org/10.1038/s41378-021-00261-2

Wu, Y., et al. (2019). Enhanced bone regeneration of the silk fibroin electrospun scaffolds through the modification of the graphene oxide functionalized by BMP-2 peptide. International Journal of Nanomedicine, 14, 733–751. https://doi.org/10.2147/IJN.S187664

Xu, Z., Ma, Y., Dai, H., Tan, S., & Han, B. (2022). Advancements and applications in the composites of silk fibroin and graphene-based materials. Polymers, 14(15), 3110. https://doi.org/10.3390/polym14153110

Zhang, Y., et al. (2020). Preparation and properties of cellulose nanofibril/graphene/polyaniline conductive aerogels. BioResources, 15(1), 1828–1843.

Zhou, P., Xie, X., Knight, D. P., Zong, X.-H., Deng, F., & Yao, W.-H. (2004). Effects of pH and calcium ions on the conformational transitions in silk fibroin using 2D Raman correlation spectroscopy and ¹³C solid-state NMR. Biochemistry, 43(35), 11302–11311. https://doi.org/10.1021/bi049344i

Downloads

Published

2026-10-29

How to Cite

Nasution, Y. H., & Chantika Aditya Prameswari. (2026). Characterization of Optical and Electronic Properties of Biocomposites Based on 2D Crystals (Reduced Graphene Oxide, MoS₂) and Biomacromolecules for Flexible Electronic Devices. Knowledge & Innovation in Molecular and Industrial Applications (KIMIA), 1(1), 32–46. Retrieved from https://gpijournal.com/index.php/kimia/article/view/767

Issue

Section

Articles